Lightweight tissue paper requires careful web handling throughout production, converting, rewinding, and packaging.
Unlike heavier paper grades, lightweight tissue has relatively low basis weight and limited resistance to local deformation. Small differences in tension across the web can therefore result in visible wrinkles, folds, edge waves, and web instability.
These defects can affect production efficiency and finished-product quality.
Common consequences include:
Unstable web tracking.
Frequent web breaks.
Folding and creasing defects.
Uneven winding.
Edge damage.
Increased material waste.
Reduced converting efficiency.
Wrinkles are not always caused by insufficient spreading force. They can also originate from uneven moisture distribution, incorrect machine tension, roller misalignment, or mechanical problems.
Before selecting a spreader roll, engineers should identify where the wrinkles occur and how they change with machine speed, tissue grade, and operating conditions.
A center wrinkle, for example, may have a different underlying cause from loose edges or diagonal wrinkles.
Several spreading principles are available for paper and converting applications. Each has different mechanical characteristics.
Segmented bowed spreader rolls
For many lightweight tissue applications, a segmented bowed spreader roll is a strong starting design.
It generally consists of a curved supporting shaft or tube and multiple rotating sections arranged along the working width.
The curved geometry creates an outward spreading effect when the paper web contacts the roller surface.
Potential advantages include:
Spreading action across the web width.
Configurable bow geometry.
Segmented rotating construction.
Customizable working width and dimensions.
Options for different surface materials.
Adaptability to different machine layouts.
For lightweight tissue, the main objective is to obtain sufficient spreading action without creating excessive lateral stress.
The design should therefore consider segment rotation, bearing quality, rotational inertia, surface friction, and the suitability of the contact material.
An adjustable-bow configuration may be particularly useful when the machine processes multiple tissue grades or operates under changing production conditions.
Lamellar spreader rolls
Lamellar spreader rolls use flexible surface elements to influence the web across its width.
Depending on their construction, they may provide controlled spreading action and can be considered for selected delicate-web applications.
The suitability of a lamellar design should be verified against the actual tissue properties, operating speed, and required spreading effect.
Helical-grooved rollers
Helical-grooved rollers use specially arranged grooves on the working surface.
They may be useful in certain web-handling arrangements, but their performance should not be assumed from the groove pattern alone.
Surface geometry, friction, web tension, and actual contact behavior determine whether a particular configuration can deliver the required result.
Crowned and concave rollers
Crowned and concave rollers can be considered for particular wrinkle patterns.
For example, certain concave configurations may help address center wrinkles under suitable traction conditions.
However, they are not universal substitutes for bowed spreader rolls. Their effect depends on web mechanics and the existing tension distribution.
Choosing the correct roller requires a review of the complete machine arrangement.
Tissue basis weight and strength
Provide the tissue basis weight, thickness, paper grade, web width, and relevant mechanical properties.
Basis weight alone does not determine the required spreading force. Two tissue grades with similar basis weights may have different tensile strength and elongation characteristics.
Machine speed
Normal and maximum operating speeds should be identified.
The roller's construction, segment rotation, bearing arrangement, surface material, and dynamic stability must suit the intended speed.
Web tension
Both machine-direction tension and cross-direction tension distribution should be considered.
The objective is to reduce local slack and improve web flatness without overstretching the tissue.
Bow geometry
The bow amount and orientation influence the spreading effect.
A fixed-bow roll may suit stable operating conditions, while an adjustable-bow roll offers more flexibility when production requirements change.
Wrap angle
The wrap angle determines the contact arc between the tissue web and the roller.
The contact arc influences how the spreading action is transferred to the web. Too little contact may provide insufficient spreading, while excessive contact can increase stress and friction.
Roller installation position
The distance between the spreader roll and the following roller affects how long the spreading effect remains useful.
A web can relax after leaving the spreader, so the position of the next roller should be considered during layout design.
A new spreader roll should not be the first response to every wrinkle problem.
A systematic diagnostic process can help avoid unnecessary equipment changes.
First, identify whether the wrinkle is concentrated in the center, near the edges, or across the full web width.
Second, compare the wrinkle pattern at different machine speeds and tension settings.
Third, inspect guide rollers, bearings, roll alignment, surface condition, and mechanical deflection.
Fourth, review the tissue moisture profile and the condition of the web before it reaches the spreader.
Finally, evaluate the existing spreader geometry, wrap angle, orientation, and distance to the following roller.
If the spreading system is unsuitable, a customized segmented bowed roll may be a practical replacement option.
The design should be based on the diagnosed problem rather than simply increasing the spreading force.
HUATAO provides industrial roller solutions for paper, film, textile, and other web-handling applications.
The HUATAO Spread Roll is a relevant product for manufacturers looking to improve web spreading and reduce wrinkles.
Depending on project requirements, customization can be evaluated around roll diameter, effective working length, curved shaft geometry, segment arrangement, surface material, shaft-end configuration, and operating conditions.
For lightweight tissue, special attention should be given to smooth segment rotation, controlled spreading action, suitable surface characteristics, and compatibility with the existing machine arrangement.
When requesting a quotation, customers should provide:
Tissue basis weight and grade.
Effective web width.
Normal and maximum machine speed.
Operating tension.
Existing roll dimensions.
Installation drawing.
Wrinkle photographs.
Existing spreading roll configuration.
Desired surface and maintenance requirements.
These details help establish a more accurate technical basis for selecting a customized spreader roll.
For more information about the company and its industrial roller business, visit HUATAO Rolls, About HUATAO, and the HUATAO Technical News Center.
Q1. Which spreader roll works best for lightweight tissue paper?
A segmented bowed spreader roll is a strong starting option for many lightweight tissue applications. Its curved geometry creates outward spreading action, while its segmented construction accommodates web contact. The final design should be selected according to tissue grade, web width, speed, tension, and wrinkle location.
Q2. Why are lightweight tissue papers more sensitive to wrinkles?
Their relatively low basis weight and limited resistance to local deformation make them sensitive to uneven tension, moisture variation, and mechanical misalignment.
Q3. Can a spreader roll eliminate every type of wrinkle?
No. It can help address wrinkles caused by insufficient or uneven cross-direction spreading, but cannot independently correct all moisture, tension-control, alignment, and mechanical problems.
Q4. Is a segmented bowed roll suitable for high-speed tissue machines?
It can be suitable when its segment construction, bearings, balance, materials, and geometry are designed for the specified operating speed. The actual speed limit must be confirmed for the selected design.
Q5. What is the advantage of adjustable-bow construction?
It allows the spreading geometry to be changed when tissue grades, web widths, or production conditions vary. This can provide greater flexibility than a fixed-bow design.
Q6. Can a spreader roll cause edge damage?
Yes. Excessive spreading force, unsuitable contact materials, incorrect alignment, or inappropriate wrap geometry may create edge stress and damage. Controlled spreading is more important than maximizing the spreading force.
Q7. How does a spreader roll differ from a guide roller?
A guide roller primarily controls web direction and position. A spreader roll introduces an outward spreading effect to influence cross-direction tension. Both can be important in a stable web-handling system.
Q8. What information should I provide to a spreader roll manufacturer?
Provide web width, basis weight, speed, tension, roll diameter, installation dimensions, wrinkle location, existing roll specifications, and photos of the problem. A machine layout drawing is particularly helpful.
Conclusion
For lightweight tissue paper, a segmented bowed spreader roll with carefully selected geometry and suitable contact characteristics is a strong design to evaluate for wrinkle reduction.
However, the best solution depends on the complete web-handling system. Tissue strength, moisture distribution, cross-direction tension, machine speed, roller alignment, wrap angle, and installation position all influence the result.
A customized spreader roll based on actual production conditions provides a more reliable approach than selecting a roller solely by its product category.
Contact HUATAO
Tony Liu | International Department
Mobile / WhatsApp / WeChat: +86 13383112591
Email: sale08@huataogroup.com
Website: https://www.huataorolls.com/
HUATAO warmly welcomes customers from around the world to contact us and establish mutually beneficial partnerships.
Persona di contatto: Mr. Maple
Telefono: +86 17778255675
Fax: 86--311-80690567