logo
Casa
Prodotti
Circa noi
Giro della fabbrica
Controllo di qualità
Contattici
Richiedere un preventivo
Notizie
TOGETHER HTL LTD
Casa Notizie

Choosing the Right P&J Hardness for Suction Couch Roll Covers

TOGETHER HTL LTD è un'ottima azienda, sono molto disposto a collaborare con voi, sicuro, efficiente, professionale, onesto, felice! Grazie per avermi fornito un servizio e prodotti stabili. -----EUROPAT

—— INDUSTRIALE DI EUROPT

Sono ora online in chat
società Notizie
Choosing the Right P&J Hardness for Suction Couch Roll Covers
ultime notizie sull'azienda Choosing the Right P&J Hardness for Suction Couch Roll Covers
1. Why Is Hardness Selection Important for Suction Couch Rolls?

A suction couch roll operates in the forming section of a paper machine. Its cover is exposed to continuous rotation, forming-fabric contact, water, vacuum-assisted drainage, and mechanical loading.

The selected cover hardness should match the actual application. An unsuitable specification may contribute to inappropriate deformation, wear behavior, surface deterioration, or operating instability.

One of the most important issues is the difference between Shore A and P&J hardness.

P&J stands for Pusey and Jones. It is an indentation measurement used for rubber-covered rollers. The higher the P&J reading, the greater the indentation and the softer the cover. Lower P&J readings indicate harder covers.

Shore A uses a different measurement method. Its readings should not be treated as interchangeable with P&J values.

For procurement purposes, always specify the hardness scale, measurement standard, nominal value, tolerance, and test conditions.

2. What Factors Should Determine the Target P&J Value?

There is no single P&J value that is suitable for every suction couch roll.

The target should be established using the original OEM specification and the actual operating environment.

Machine speed

Provide the normal and maximum machine speed, roll diameter, and planned speed increases. These conditions are relevant to rotational stability, dynamic balance, cover deformation, and the mechanical performance of the complete roll assembly.

Vacuum and dewatering conditions

Review operating vacuum, suction-zone configuration, hole geometry, suction-box arrangement, and effective suction width.

Hardness should not be used as a substitute for correcting vacuum-system problems. Poor drainage may originate from the forming fabric, suction system, sheet characteristics, or other process conditions.

Forming-fabric contact

Consider fabric construction, tension, condition, contact behavior, and maintenance history. These factors help explain the actual duty of the roll cover.

Mechanical loading

Provide the available load data, support configuration, deflection requirements, and vibration history. A proposed hardness should be assessed in the context of the complete roll design.

Operating environment

Water chemistry, cleaning chemicals, temperature, and contamination may influence the suitability and ageing behavior of rubber or polyurethane compounds.

3. How Should Different Cover Materials Be Evaluated?

Hardness alone does not determine the performance of a roll cover.

Two rubber compounds with the same P&J value may have different resilience, tear strength, abrasion resistance, and chemical compatibility.

Rubber cover evaluation should include:

  • Elastic recovery.

  • Abrasion resistance.

  • Tear strength.

  • Hysteresis and heat generation.

  • Water and chemical resistance.

  • Bonding performance.

  • Surface finishing requirements.

Polyurethane cover evaluation should include:

  • Abrasion resistance.

  • Mechanical strength.

  • Resilience.

  • Hydrolysis resistance.

  • Temperature suitability.

  • Chemical compatibility.

  • Bonding and finishing requirements.

Neither material is automatically the best choice for every forming-section application.

4. How Can Buyers Confirm the Correct Hardness?

A practical selection process should involve four stages.

First: Review existing documentation.

Collect the original OEM drawing, cover specification, nominal hardness, inspection records, and maintenance history. If the old cover has performed well, its original specification provides a useful starting point.

Second: Inspect the existing cover.

Check for cracks, uneven wear, surface deterioration, profile changes, and possible delamination. Remember that ageing and operating exposure can change the measured properties of an in-service cover.

Third: Obtain a material recommendation.

Provide the machine speed, vacuum conditions, forming-fabric information, mechanical loading, and environmental conditions. Ask the supplier to explain the proposed compound and hardness.

Fourth: Define inspection requirements.

Specify the applicable P&J measurement procedure, test temperature, cover thickness, measurement locations, nominal value, and tolerance.

ISO 48-8:2018 is an appropriate reference for P&J testing of rubber-covered rollers. Require an inspection report showing that the finished cover meets the agreed specification.

5. Frequently Asked Questions

Q1. What P&J hardness is recommended for a suction couch roll?

The recommended value must be determined for the specific machine and cover formulation. Consider the roll's function, machine speed, vacuum conditions, forming-fabric contact, mechanical loading, and original OEM requirements. Do not apply a generic value without confirming its suitability.

Q2. Can I convert Shore A directly into P&J?

No direct numerical substitution should be assumed. The two methods use different measurement principles. Approximate comparison charts may help during preliminary discussions, but the final specification should identify the required scale and testing procedure.

Q3. Does a higher P&J value mean a harder cover?

No. P&J is an inverse indentation measurement. Higher readings indicate greater indentation and a softer cover. Lower readings indicate less indentation and a harder cover.

Q4. Can harder rubber reduce wear?

Not necessarily. Wear depends on formulation, loading, abrasion, water exposure, temperature, surface conditions, and maintenance. Hardness alone cannot predict cover service life.

Q5. Does softer rubber improve vacuum dewatering?

Not automatically. Dewatering depends on the complete forming system, including vacuum conditions, suction-hole geometry, fabric condition, sheet characteristics, and machine speed. Hardness changes should be evaluated as part of an overall engineering review.

Q6. Which cover is better: rubber or polyurethane?

The answer depends on the application. Compare resilience, abrasion resistance, tear strength, hydrolysis resistance, chemical compatibility, and operating temperature. Request material information and a project-specific recommendation.

Q7. How should hardness be inspected?

Use the agreed measurement standard and calibrated equipment. Define the test temperature, cover condition, measurement locations, and tolerance. Record the results so future replacement and maintenance decisions can use a consistent reference.

Q8. Can hardness change during operation?

Yes. Ageing, temperature, repeated deformation, chemical exposure, and surface wear may influence elastomer properties. An in-service hardness reading should therefore be compared with the original manufacturing specification and inspection records.

Q9. What information should I provide for a replacement cover?

Provide the roll drawing, machine position, diameter, face length, operating speed, vacuum conditions, forming-fabric information, existing cover material, hardness, and observed wear. Include the inspection and acceptance requirements.

Q10. Should I change hardness if the existing roll has drainage problems?

Not before identifying the cause. Check vacuum performance, suction-hole condition, forming-fabric characteristics, loading, surface wear, and operating parameters. A hardness change should only be proposed when the engineering review supports it.

Conclusion

The correct P&J hardness for a suction couch roll cover is determined by the actual forming-section application, not by a universal conversion chart.

Paper mills should distinguish P&J from Shore A, review the original specification, evaluate operating conditions and material properties, and establish a consistent inspection procedure.

A well-defined hardness specification makes replacement procurement more reliable and provides a useful baseline for future maintenance.


Contact HUATAO

Tony Liu | International Department
Mobile / WhatsApp / WeChat: +86 13383112591
Email: sale08@huataogroup.com
Website: https://www.huataorolls.com/

HUATAO welcomes customers worldwide to discuss their paper-machine roll requirements. Send your existing drawings, cover specifications, and operating conditions to begin a technical discussion.

Tempo del pub : 2026-11-17 16:32:46 >> lista di notizie
Dettagli di contatto
TOGETHER HTL LTD

Persona di contatto: Mr. Maple

Telefono: +86 17778255675

Fax: 86--311-80690567

Invia la tua richiesta direttamente a noi (0 / 3000)